Use a Pneumatic Forklift
You could often find pneumatic forklifts in warehouses and shipping operations. Also called pump trucks or pallet trucks, they are utilized to transport things and materials around on wooden pallets using metal forks mounted on a wheeled counterweight. The counterweight contains a pump that could raise the forks off the ground. A pallet truck is intended to be operated by one person.
To be able to prevent loosing control while lifting heavy loads, pallet trucks should always be operated carefully. Equipment must be inspected before operating. Clear the wheels area of any obstructions. Check that the handle turns smoothly. The pallet should be stacked carefully to ensure that nothing will fall off during transportation.
On the end of the pallet truck's handle, squeeze the level found on the inside of the metal loop to be able to release the air in the pump and lower the forks. The forks can then be pushed into the pallet slots. The forks must be at the center in order to guarantee even distribution of the pallet's weight across them. Lift the forks from the ground by pumping the pneumatic lift's handle until the pallet has cleared the ground completely. Do not lift the pallet too high or the forklift could unbalance.
Pull on the handle and then drag it behind you if you want to move the pallet. It is not safe to push the pallet ahead of you because the momentum can cause it to lose control. Slowly take turns and don't attempt to stop abruptly. Gradually stop, squeeze the lever, and the forks would lower to the ground. Finally, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent location.