Compared to a sit-down model, the stand-up lift truck model is really different to operate. The method at which you pick up loads and your movements are completely different. If you do not have proper training for using a stand-up unit, you can probably cause harm co-employees or to yourself. When utilizing a stand-up model, you should follow the correct safety regulations. There are some basic operating standards that should be met when operating a stand-up model.
When starting, stand up on the lift truck in order to get a feel for the steering knob and the controls. The steering is handled using the knob steering plate instead of a steering wheel. Take note that this particular knob moves exceptionally fast, therefore, you have to be accustomed to moving it carefully so as to be sure not to over steer. The horn is situated on the control handle, as is the control for the fork movement and for backwards, forwards. The floor pedal allows the machine to move.
Turn the key to start the forklift's engine when you are set to begin. The forks must not be extended at this stage. When you are moving all-over the floor, the forks should be pointed slightly upwards. Never drive with the forks in their extended position. If you are moving forward, move the control handle forward and in order to make the lift move forward, step on the pedal. If you are backing up, be certain to beep your horn to alert people around you. Look behind you prior to stepping on the pedal so as to make sure the way is clear and safe. Next, while stepping on the pedal, pull the control handle towards you. Always stay alert and focused and make sure that you are operating in a safe manner at all times.
When it comes to turning corners, turn your steering knob in the direction you have to go while keeping your hand on the control handle and your foot on the power pedal. When turning right, the steering knob would move in a clockwise direction while moving forward. If you are turning left, your steering knob would go in a counter-clockwise direction.
The stand-up models take some getting used to, particularly if you have only used sit down models. With some training and taking some time to know the equipment, you could efficiently and quickly handle loads in little time.