Change a Propane Tank
Propane powered forklifts are normally utilized inside warehouses. The forklift is made with the propane tank mounted at the back of the driver. The tanks, which look much like beer kegs, need to be replaced every so often as they have a limited lifespan. Drivers of forklifts must utilize caution when handling propane tanks. Compressed gases are hazardous, specially since the gas is flammable. Use care when removing and replacing propane tank to avoid injury.
1 To change a propane tank, first stop the forklift while leaving the engine running, and turn the valve on the tank off. Let the forklift run until the engine dies. This procedure burns off the gas inside the transfer hose that connects the tank and the engine. Before taking the second steps, put on the proper safety equipment, like for instance insulated gloves made of either leather or neoprene. It is really vital for you to protect your skin from touching the compressed gas, which is very cold.
2 The hose of the tank has to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, reconnect the holding straps and reattach the hose at the valve of the tank by tightening the nut.
3 Leaks could be inspected simply by applying soapy water to the valve and opening it slightly. If there is a leak, it will cause bubbles to froth from around the valve. If this happens, inspect the valve area and the connection hose at the nut. The connecting nut must be re-tightened if you detect any leaks around the area of the valve, and after that do the leak checking procedure again. Persistent leaks mean that both the nut and connecting hose must be replaced. Nevertheless, if replacing the nut and hose still does not stop the leak, the tank should be replaced.
4 Lastly, open the valve all the way to enable the gas to fill the connecting hose. Afterward you could start the lift truck and resume working.