Nearly all of the time, businesses would spend lots of money to purchase their forklifts. It is vital, therefore to take proper care of your machine to protect your investment into the long run. It is a good idea to know the procedures that are undertaken in taking care of and maintaining this machine.
By starting up the forklift and listening closely how it works is one of the best ways to tell how good the engine is working. For example, if there are any knocks or misses, the machinery is faulty and this must raise several concerns. Also listen closely for any squealing noise which come from the belts as these noises would provide you with a wealth of information.
Several of the main parts requiring attention during maintenance comprise the gauges, horn, safety warning devices, the overhead guard and the lights. Any burnt out light bulbs or faulty parts need to be replaced as soon as they are noticed. It is also imperative to inspect the wiring.
When the above components have been inspected thoroughly, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Every battery cell must be inspected so as to make certain that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and then change the filters. The fuel filters, hydraulic filter and the transmission filter must be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
When the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle has to be carried out. If there is a grease fitting on the axle make sure to apply some grease. Inspect the engine belts for any cracks or frays. If you find any, fix the issue accordingly. Next, inspect every other component of the equipment like the wheels. If any type of fault or problem is detected, be sure to deal with it immediately in order to make sure the equipment is running at its safest and optimum levels.